Construction of AC Servo Motor

 

• As that of in the conventional motor. there is stator and rotor in the AC servo motor. 
• The stator winding is wound for two winding, both windings are 90 degrees with each other. 
• The constant AC supply is given to main winding or reference winding.
•  The constant frequency variable voltage is given to the stator second winding or control winding. 
• The variable voltage is controlled through electronic controller. 
• The rotor of AC servo motor is designed for high resistance therefore the X / R ratio is very low. 
• The torque speed characteristic of AC servo motor is linear due to low X / R ratio. 
• The convention induction motor is applicable as servo motor but motor operation becomes unstable due to positive slop.

You may also like to read these articles What do you mean by Power & Energy? What do you mean by Potential & Potential Difference? Resistance & Resistivity What is electric charge?

•  The rotor of servo motor is either squirrel cage or drag cup type. 
• The diameter of rotor is kept small in order to keep low inertia. 
• The torque – speed characteristic of servo motor depends upon angle between two stator windings. 
• The AC servo motor generally operates from 50 Hz to 400 Hz frequencies.  

Download Power Point : AC Servo Motor