## Featured post

### What Is Fluid and Its Properties?

Science helps to understand things in a better way. We know about fluid but science helps to understand different aspects of it in a better ...

## 29/09/2018

### Starting torque

• It is torque developed by the synchronous motor when name plate voltage is applied to its armature winding. It is also called as breakdown torque.
• It may as low as 10% in the case of centrifugal pump.

### Running torque

• It is torque developed by the synchronous motor under running condition. It is determined by horse power and speed of the motor.
P = Tω

### Pull in torque

• A synchronous motor is started as induction motor during starting condition and its speed below 2 to 5% of the synchronous speed.
• When the excitation ( or DC supply ) to the field winding is applied, the motor pull into synchronism resulting stator and rotor magnetic field rotates at same speed.
• The amount of torque requires for synchronous motor to pull into synchronism is called as pull in torque.

### Pull out torque

• It is maximum torque which the synchronous motor can develop without pulling out of step.
• When the synchronous motor is loaded, the rotor falls back by some angle a is called as load angle.
• The stator and rotor magnetic rotates at synchronous speed in spite of some load is applied on the rotor.
• The synchronous motor developed maximum torque when the rotor falls back by angle 900
• When the load increases beyond its maximum rating, the rotor steps out of synchronism and synchronous motor stop.

## You may also like :

#### 1 comment:

1. Extremely useful information which you have shared here about motor. This is a great way to enhance knowledge for us, and also beneficial for us. Thank you for sharing an article like this.
Linear induction motor