Featured post

What Is Fluid and Its Properties?

Science helps to understand things in a better way. We know about fluid but science helps to understand different aspects of it in a better ...

08/03/2017

Control Circuit of Forward Reverse Starter

Working of Forward  – Reverse starter control circuit

Forward direction

  • Press ON Push button ( F ON )
  • The forward contactor coil gets supply through phase R – OFF push button – R2 – forward contactor coil – ON push button F – phase Y.
  • The forward contactor coil energized and three phase induction motor runs in the forward direction. 
  • As soon as forward contactor energized, its auxiliary contact F1 becomes normally closed ( NC from NO ) whereas F2 becomes normally open ( NO from NC ). 
  • Now the forward contactor gets supply through phase R – OFF push button – R2 – Forward contactor coil – F1 – phase Y.

Reverse direction

  • Press ON push button ( R ON ).
  • The reverse contactor coil gets supply through phase R – OFF push button – F2 – reverse contactor coil – R ON push button – phase Y.
  • The reverse contactor coil energized and three phase induction motor runs in the reverse direction.
  • As soon as reverse contactor energized, its auxiliary contact R1 becomes normally closed ( NC from NO ) and R2 becomes normally open ( NO form NO ).
  • Now the reverse contactor gets supply through phase R – OFF push button – F2 – Reverse contactor coil – R1 – phase Y. 
  • The auxiliary contact R2 becomes NO from NC therefore the motor does not run in the forward direction.

control circuit of forward reverse starter




3 comments:

  1. This is really good site. Thanks for giving complete information about elecrical engineering...!Home cleaning

    ReplyDelete
  2. Hi this article keeps good knowledge about the forward reverse starter.

    ReplyDelete
  3. Initial You got a awesome blog .I determination be involved in plus uniform minutes. i view you got truly very functional matters , i determination be always checking your blog blesss. Printed Circuit Board

    ReplyDelete